|
CASE HISTORY NO.1
 A
specialist manufacturing company who were producing Glass Fibre
Cloth for use in the aircraft industry approached Hill Brush with
a problem. They were getting fine particles of glass dust forming
on their product during the manufacturing process that needed to
be removed quickly and efficiently.We invited representatives from the company to visit our factory
in Mere to discuss the exact nature of the problem and to come up
with a solution.
Hill Brush successfully resolved their problem by manufacturing
a quantity of special roller brushes that removed the dust from
the Glass Fibre Cloth following its manufacture.
CASE HISTORY NO.2
 Have
you ever struggled to open an Oyster with just your hands and a
knife? Well, Hill Brush was approached with this very problem by
a company who had an idea of how to overcome this rather unusual
predicament.We discussed and developed their idea and came up with the perfect
solution. We now manufacture and supply them with a wooden Oyster
Clamp that fits on the edge of your dining table and allows you
to open your Oyster with the minimum of effort. Our customer now
sells this product to Restaurants and Hotels across the UK.
If you are partial to the odd Oyster and are
interested in owning your very own Oyster Clamp, they can be found
at www.z-u.co.uk.
CASE HISTORY NO.3
 A
company who specialise in producing diamond impregnated floor grinding
equipment needed a way of preventing the debris from the grinding
process being dispersed in the work area.They asked Hill Brush if they could put a row
of knots into a special prototype plastic moulding that would act
as a shield around the grinder. This proved to be a challenge as
the specification required was outside the parameters of most modern
brush making machinery. However with special tooling and adjustment
to our filling and trimming equipment we produced a finished product
that helped them to achieved their objective.
|
